Filter
Top Products
31
INSTALLATION AND OPERATIONAL CHECKS
After installation,check for gas soundness.The supply pressure can be checked at the
grill injector.Access to the injector is by first removing the grill rear panel (4 screws)
and the left hand side panel (2 screws).Then remove the 2 fastening screws on the left
hand side of the burner and slide the burner off the injector.
Fit the hotplate burner bodies and caps,pan supports and grill pan.Referring to the
instructions for use where necessary,
1. Check that the hotplate and grill burners ignite correctly and burn with a steady
flame.Check for a steady flame on the low setting.
2. Check that with the oven set to mark 9,the burner ignites at low rate,and then
increases to full rate within 60 seconds.Leave the oven full on with the door closed
for 10 minutes,and check that when the control is turned to the ‘Slow Cook’
setting that the flame reduces.
3. Check the operation of the oven timer and oven light.
Instruct the user on operation of the cooker.
NOTE: On the models manufactured for use with LPG,it is normal for the oven and
grill burners to burn with yellow tips.
INSTALLATION INSTRUCTIONS