Canon ip3000 Water Dispenser User Manual


  Open as PDF
of 5
 
After that:
Put the CISS at the right side of Pull out the rubber plug from Insert the Air Filter.
the printer. the Air Hole.
2) 2
nd
Step: Remove the Original cartridge
Open the cover and move the cartridge carriage to the below position, and then take off the Power Cord.
Then take out the original cartridge.
3) 3rd step: Place the CISS cartridge
Take off the cover from the CISS cartridge, and then install the CISS cartridge inside the cartridge carriage.
4) 4th step: Installing the Support Arm
Take off the label from the balance arm. Fix the balance arm on the support arm as show on the picture.
 previous next