Filter
Top Products
Adding Your Multifunction to Your Network << Previous Next >>
Step Five
Select Wireless LAN setting list, then press the OK button.
Make sure that Connection is set to Active, and then press the HOME button.
It may take a while before the connection is complete. In this case, press the Back* button (C) and wait for about a minute, then
display the Wireless LAN setting list screen again.
*Back button location varies depending on model.
NOTE:
• If the communication status does not improve, make sure of the following.
• The machine and network device are turned on.
• There is no obstacle between the machine and access point, and wireless communication is possible.
• There is no microwave, refrigerator or any other object that may cause radio interference nearby.
11