Filter
Top Products
• Push the arrow button to select up to 20 seconds.
• Now push the On/Off button. Once the boiling temperature is
reached the kettle will keep boiling the extra three seconds from the
CL setting plus the seconds set with the timer.
Please note: once you remove the kettle from the base all settings will
return to the default (see Fig. 3).
7. CLEANING
• Always unplug cord of power base before cleaning.
• Make sure kettle is cold.
• Clean the exterior surface with a clean, damp, soft cloth.
• Never use abrasive cleaners or scouring agents.
• Rinse out kettle.
Attention:
• Over time the stainless steel inside of the kettle may change color
slightly. This is caused by the intense heat of the heating element,
especially if the kettle was turned on repeatedly without water. This
will not diminish the performance of the kettle in any way.
• If your water has a high calcium content, calcium deposits might dull
the inside. Follow the instruction below for decalcification.
8. DECALCIFICATION
Hard water can leave calcium spots inside the kettle. Use a commercial
descaling agent and follow the instructions that come with the agent.
NOTE:
Use of Vinegar
You can also use white vinegar to descale the inside.
• Fill the kettle up to the desired level with water.
• For each 2 cups of water (16 oz) add 6 tablespoons of white vinegar.
• Bring to a boil.
• Discard the solution and repeat if necessary. Let the kettle cool down
and rinse the kettle once or twice with fresh cold water.
10.