Capresso 464 Coffeemaker User Manual


 
Initial Preparation:
Open the water container lid and r
emove the charcoal filter
holder.
Remove the charcoal filter from poly bag.
• Soak the filter in a glass with cold water for a few minutes.
This will activate the filter.
• Insert the cartridge into the charcoal filter holder (Fig. 12).
• Place the charcoal filter holder back into the water tank.
When to replace the cartridge:
• Replace the filter after 60 pots of coffee or 6 weeks after first
use, whichever comes first. Unused cartridges can be stored
indefinitely
.
Replacement cartridges are available through your local
Capresso dealer or by using the enclosed mail order form or
through the website: www.capresso.com.
9.7 GOLD TONE FILTER AND FILTER INSERT
Push the Filter Release button (Fig. 1.11). The filter holder swings
o
pen. The Goldtone filter and the filter insert can be removed.
• Before grinding/brewing coffee always make sure that the
GoldTone filter is empty and placed into the filter insert.
CAUTION/ DANGER!
Never use the coffee maker without the filter insert and
GoldT
one filter. Extremely hot water can overflow onto the
warming plate and counter. If this occurs, turn the machine off
and wait until the brewing stops.
• Then push the Filter Release button, add the filter insert and
the GoldTone filter and close the filter holder. Place the carafe
underneath and continue brewing until the water tank is empty.
9.8 MODEL #464: USING THE GLASS CARAFE
The CoffeeTEAM GS, model #464, comes with a glass carafe.
Always make sur
e that the lid of the carafe is in place when
brewing coffee. Without the lid, the drip stop cannot be activated.
If you lose the lid, you cannot brew coffee. Use the enclosed
mail order form or call 1-800-767-3554 to order a new lid. Do not
place carafe in microwave, oven or stove.
10. GRINDING AND BREWING COFFEE NOW
Cof
fee maker is plugged in and the time, auto-on time are set.
• Beans are in the bean container.
• Fill the water tank with the desired amount of water.
• Make sure the filter insert and GoldTone filter are in place and
the GoldTone filter is empty.
• Make sure the Filter holder is closed.
Insert the carafe with lid into the machine.
• Make sure the “GRIND/BREW“ button is illuminated.
• Push the ON/OFF button (Fig. 2). The red ON/OFF light
illuminates. The grinder will start grinding and the ground
coffee will push into the GoldTone Filter. Through the window
in the feeder channel cover, you can see the ground
coffee move forward. Once grinding is finished, the brewing
process starts.
CAUTION: As long as the grinder is in operation, do not open
the bean container lid and do not insert your finger or any other
object into the grinder
.
10.