Filter
Top Products
c) To change the Auto-On Time
• Push and hold the AUTO button for 2-3 seconds until the display illuminates
with the clock icon and the clock icon starts blinking.
• Push and hold the HOUR and then the MINUTES button to set a new
Auto-On time.
• Select the number of cups you would like to brew automatically by pressing
the CUPS button or choose GROUND COFFEE. See b) Setting the Auto-On
Time above.
• Once desired Auto-On time is programmed, press the AUTO button again.
The display reverts to the actual time and the clock icon will remain illuminated.
• To turn off the Auto-On feature press the AUTO button again until the clock
icon disappears.
d) Activating the Auto-On Time
• Push the AUTO button briefly. The display illuminates the clock icon,
indicating the Auto-On setting is active. The machine will show the actual
time. At the preprogrammed time the machine starts grinding and brewing (or
brewing only). For details see chapter 8.2.
e) Grind Volume Setting: the "2-12" button
The CoffeeTEAM PRO lets you set two different grinder settings: one for immediate
use and one for Auto-On use.
For immediate use: Push the "2-12" button repeatedly to select from 2, 4, 6,
8, 10, 12.
For Auto-On use: Push and hold the AUTO button until the clock icon is
illuminated and starts blinking. Push the CUPS button to select from 2, 4, 6, 8,
10, 12. The grinder will automatically adjust the time to grind the right volume
for the cups programmed.
f) Oily Bean Setting
The machine features a special OILY button which adds extra time to the grinding
process for slow moving, oily coffee beans. To activate this setting, press the
OILY button on the display prior to brewing. The oily bean icon will illuminate
and the grinder will automatically add extra time to the grinding cycle.
IMPORTANT: Do not engage the OILY setting when using non-oily beans. This
could cause the filter to overflow with ground coffee and damage the machine.
CAUTION: Do not use the FINE grinder setting when using the OILY setting.
Oily beans should be ground using the COARSE grinder setting.
7.2 ADJUSTING THE COFFEE STRENGTH
To increase the strength of the coffee we recommend programming a higher
cup amount such as 10 or 12 cups then reducing the amount of water you add
to the water tank. For example, select 12 in the CUPS setting but only fill the
water tank to the 8 cup marking. This will add extra ground coffee to the filter
and increase the strength of the brew.
7.3 POWER INTERRUPTION
• If the machine is unplugged or power is interrupted all settings described in
chapters 7.1 and 7.2 must be reset.
• If the machine was set to Auto-On and power was interrupted, the machine
will not brew coffee at the programmed time.
9