Impressa E Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
RED TEXT represents information in the display.
A) First Time Ever Preparation
Place machine on flat, hard surface. Remove sticker from
LED display.
1. Fill water in tank and beans in bean container.
2. DO NOT install the Water Filter Cartridge now!
3. Push
ON/OFF button. OPEN TAP. Place a cup under-
neath the frother and turn the SELECTOR to the water
symbol.
FILLING. Water pumps through the frother into
the cup and stops automatically. SHUT TAP. Turn the
SELECTOR to the Cup Symbol. SYSTEM FILLING.
HEATING. After two minutes PRESS RINSE.
4. Place a cup underneath the coffee spouts and push the
RINSE button. READY. Place a large cup underneath the
coffee spout and press the
1-CUP button. The machine
starts grinding and brews coffee. Discard the first two
cups.
READY. You can only brew coffee when the display
shows READY.
B) Daily Preparation
• Fill fresh water in tank and check bean container.
• Push ON/OFF button: HEATING. RINSE.
• Place a cup under the coffee spouts and press the RINSE
button. READY.
C) Factor
y Settings:
Filter:
–
Har
dness: Level 2
Aroma: ROBUST
Auto Off: 2 HRS
Stats:
Language: English
ML / OZ:
OZ.
Rinse:
✔
a. Coffee
b. Steam/Hot Water
a
b
Selector
f
. Rinse
g. Steam
h. Pre-Ground
Coffee
e. Programming
a. On/Off
b. 1-Cup
mild
normal
strong
d. 2-Cup
e. Dial
READY
LED
D
isplay
Frother
sleeve
slides up
and down