Filter
Top Products
J) Programming
Push and hold the P button until the display shows FILTER -.
Turn the
DIAL to access the other functions: HARDNESS,
AROMA, AUTO OFF, STATS, LANGUAGE, ML/OZ, RINSE
✔.
Select the function, push the
DIAL, turn DIAL to see or
select option. Push DIAL to confirm. Push P button to get
back to READY. For details see Operating Instructions.
K) Installing and Activating the Clearyl Water Filter
NOTE: Using the Clearyl Water Filter avoids decalcifying.
1. Rinse cartridge under running water. Insert cartridge
into water tank reception and close the cartridge holder.
2. Fill tank with cold water. Push and hold the
P button:
FILTER -. Push the DIAL: NO -. Turn DIAL: YES ✔.
3. Push
DIAL. INSERT / OPEN TAP. Place a container
(20 oz.) under the frother. Turn the
SELECTOR to the
water symbol. FILTER RINSING.
4. After 90 sec.: SHUT TAP. Turn the SELECTOR to the cup
symbol.
HEATING. READY.
The display will remind you when to replace the filter.
Please note: When the filter program is activated, the
decalcifying program (HARDNESS) is turned off.
Important: Do not let the filter dry out. Filter needs to be
submersed in water. See page 16, Operating Instructions.
L) Replacing and Activating the Clearyl Water Filter
When display shows CHANGE FILTER / MACHINE READY
• Remove old filter, rinse new filter under running water and
insert (see above). Place a large container (20 oz.) under
the frother and push the
RINSE button. The DIAL illuminates.
• Turn the
DIAL until the display shows FILTER.
• Push the DIAL. the display shows REPLACE OPEN TAP.
• Turn the SELECTOR to the water symbol. FILTER
RINSING. See Chapter K,4 above.
Important: If message CHANGE FILTER / MACHINE READY
does not show up after 3 months, you must replace the filter.
M) Cleaning with Special Tablet
This cleaning cycle removes coffee oils inside the machine.
This message will appear after 200 cups of coffee: CLEAN
MACHINE / MACHINE READY. Takes less than 15 minutes!
Important: Only use the special white round cleaning tablet!
Important: Once started, do not interrupt the program!
1. Fill water tank. Push the RINSE button. EMPTY DRAWER.
Please note: You must remove the drawer for 20 seconds
even if it is empty. Replace complete drawer.
2.
PRESS RINSE. Push the RINSE button. CLEANING. After
a moment the display shows
ADD TABLET / PRESS RINSE.
3. Drop one white tablet into the "ground coffee funnel."
Push the
RINSE button. CLEANING. After a few minutes:
EMPTY DRAWER. Carefully lift, remove and empty drawer
and r
eplace.
READY. The machine r
esets itself and
r
eminds you to clean again after the next 200 cups.