Filter
Top Products
F O R C E D A I R O V E N M A N U A L
Cascade TEK 5245-A NE Elam Young Parkway Hilllsboro Oregon 97124
Toll Free 888-835-9250 503-648-1818 FAX 503-648-1798 info@cascadetek.com www.cascadetek.com
REV 01.08
10
6.6 Recommended Burn-In: The Refer to Section 3.5 and 3.6 for information on
recommended cleaning and burn in process prior to operation.
6.7 Quick Start
Operation Example
1. Turn on the power switch
(located at the left of the
instrument panel) It should
glow with a green
light if it is
connected to the power
correctly.
2. The “Process” window
(upper window on your
Watlow 981controller) will
display the current chamber
temperature.
3. The lower window of your controller will indicate the current
temperature set point.
4. To increase the set point, press the UP arrow key until the desired set
point is displayed in the lower controller window.
5. To decrease the set point, press the down arrow key until the desired
set point is displayed in the lower controller window.
6. The oven will heat to your selected set point and remain there until
changed. Note: The set point will not change even if the power is
turned on and off.
7. Please refer to the enclosed Controller manual for complete
instructions.
Power Switch
Current
Temp
Display
Temp Set
-
Point Display
UP
&
DOWN
Arrows