Filter
Top Products
4
Fig. 5
Changing the Light
IMPORTANT: DO NOT PERFORM MAINTENANCE
OR CLEANING OF THE EXTRACTOR WITHOUT FIRST
SWITCHING OFF THE ELECTRICITY SUPPLY.
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY
AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO
COOL BEFORE REMOVING IT.
Carefully prise the bulb from the extractor using a small,
flat-bladed screwdriver. Refit the new bulb taking care not
to touch the glass (Fingerprints will lead to premature failure
of the bulb).
Do not touch bulbs or adjacent areas during or straight after
prolonged use of the lights.