Filter
Top Products
4
How to use the hob
The ceramic surface of the hob allows fast transmission of heat vertically from the heating elements under the glass to
the pans on the hob top.
The heat does not spread horizontally, so the hob top remains relatively cool only a few centimetres from the zone in
use.
To switch the hob on
Touch and hold
until the zone displays show 0 or H and the zone indicators flash.
Please note:
If a zone is not selected within 10 seconds, the hob will automatically switch off.
To switch on a zone
Once the hob is switched on, touch
for the zone required. The zone indicator will switch on to confirm the zone is
active.
Touch and hold
to select the power level from 1 (minimum) to 9 (maximum). The power level selected will show on
the zone display.
If required, touch
again to deactivate the touch control for the zone.
To adjust the power level once set
Touch
for the zone required. The zone indicator will switch on to confirm the zone is active.
Touch and hold
or until the required power level shows on the zone display.
To use the dual zone
The dual zones are formed of two separate coils of resistant material.
Once the zone is switched on, touch
at any time to switch the dual zone on or off. The dual zone indicator will
switch on when the dual zone is on.
To switch off a zone
Touch
for the zone required.
EITHER Touch
and at the same time.
OR Touch
until the zone display shows 0.
The zone display will show 0 for approximately eight seconds before showing H to indicate the residual heat.
To switch the hob off
Touch and hold
at any time.
.