Filter
Top Products
GB
NOTES FOR THE INSTALLATION
Once the electrical connection has been carried out, apply voltage to the oven only
after installing it.
Before using the oven, we suggest to:
• remove the special film covering the oven door glass (when pro-
vided)
• heat the empty oven at max. temperature for 45 minutes (to remo-
ve unpleasant smell and smoke caused by working residues and
by the thermal insulation)
• carefully clean inside the oven with soapy water and rinse it .
IMPORTANT: When running, the front side of the appliance gets quite hot. See that chil-
dren do not get near the oven.
Moreover, the bonding agent joining the rolled sections to the piece of furniture has
to stand temperatures no lower than 90°C to avoid deformations and coating
disjunction. In case a plane is inserted, the electrical connection of the plane and
that of the oven should be carried out separately, both for electrical reasons and
to facilitate the frontal extractibility of the oven.
INSERTION AND ASSEMBLY
Insert the oven into the opening of the furniture, resting it on the base and pushing it as far
as the ledge of the side stanchions against the shoulder of the piece of furniture. For the
dimensions of the oven see furniture and technical data.
•Open the door and fix the oven withfour wood
screws to be screwed upthrough the holes in the
side stanchions of the oven.
Pay attention to fix the oven in an absolutely firm
way, as above indicated, and to insulate the
electrical elements in order to avoid an eventual
contact with metallic parts .
19