Filter
Top Products
Clock Functions – Setting the Clock
and the Minute Minder
Setting the clock
After a power failure, or on first connection, the clock will flash 12.00 in the clock display.
1. Touch the
or keys to select the correct time.
2. To confirm the selection, touch
.
To change the time (when the time is set, and not flashing on the clock display)
1. Touch the
and keys simultaneously
2. Touch the
or keys to select the correct time.
2. To confirm the selection, touch
.
Using the minute minder
The minute minder can be used when the oven is switched on or off. It can be set for up to 9 minutes and 59 seconds.
PLEASE NOTE: At the end of the countdown, the minute minder will not switch off the oven.
To set the minute minder:
1. Touch
for approximately two seconds. The timer symbol and 0m00s will flash.
2. Touch the
or keys to select the correct time. Once the required time is shown on the display, a few seconds of
inactivity will set the clock, and the countdown will begin.
To reset the minute minder to zero, follow steps 1 and 2 above, setting the required time as 0m00s.
To check on the time remaining on the minute minder, follow step 1 above. The remaining time will show on the
display.
When the countdown is complete, the display will flash 0m00s and there will be recurring beeps. To switch off the
beep, touch either the
or .
6