Filter
Top Products
32
Connection of the Power Supply Cable
Unhook the terminal board cover by inserting a screwdriver into the two hooks A (fig. 21).
Open the cable gland by unscrewing screw F (fig. 22), unscrew the terminal screws and remove the
cable.
The new supply cable, of suitable type and section, is connected to the terminal board following the
diagram of fig. 23.
A
F
Feeder Cable Section
Type H05RR-F
230 V~ 3 x 1.5 mm
2
230 V
E
N
L
E Earth
N Neutral
L Live
Fig. 21
Fig. 22
Fig. 23