Vermont Casting Gas Grill Griddle User Manual


 
To open the side burner, simply lift up and out
on the side burner lid. The lid can be used as
additional side table space.
To match light the side burner, follow steps 1
and 2 above, then strike a match and set it in
the side burner, near the burner as shown to
the right.
Turn the side burner control knob to the high
position. The side burner should light.
To turn off the side burner, turn the side burner
control knob counter-clockwise to the Off
position.
27
Side Burner Operation
DO NOT place more than 10 pounds of
weight on the side burner lid.
DO NOT close the side burner lid while the
side burner is on.
The side burner table and lid may be very hot
during and after use. Use caution when
handling the components.
LIGHTING INSTRUCTIONS
1. Open the side burner lid before
operating.
2. Open the L.P. Gas Cylinder valve 1
to 1-1/2 turns.
3. Push in and turn the side burner
control knob clockwise to the high
position.
4. IMMEDIATELY press the electronic
igniter on the front control panel of the
grill.
The side burner should light - release
the electronic igniter.
!
!