Filter
Top Products
5
6
Carefully place the Firebox onto the Upper Leg Supports. The Air Damper hole should be positioned on your RH side. While a
helper holds the Firebox in position, secure the Firebox to the Upper Leg Supports with 4 each 1/4-20X1 3/4" Machine Screws and 4
each 1/4-20 Flange nuts. Tighten securely.
Page 10
1/4-20
Flange Nut
Qty. 4
1/4-20x1 3/4”
Machine Screw,
Qty. 4
1/4-20x3/4”
Machine screw
Qty. 4
Install the Grease Tray Brackets onto the bottom of the firebox using 2 1/4-20x3/4" Machine Screws per bracket.
Once the Grease Tray Brackets are installed - slide the Grease Tray onto the Grease Tray Brackets.
Grease Tray Shown Installed
Grease
Tray
Bracket
1/4-20x3/4”
Machine
screw
1/4-20
Flange Nut
1/4-20x1 3/4”
Machine Screw
Firebox