Filter
Top Products
Installation Instructions PAC 510, 515, 520
7
DANGER: IMPROPER WIRING CAN LEAD TO DEATH
OR SEVERE PERSONAL INJURY! Grounding must be
installed by qualified personnel using a UL Recognized No.
12AWG Green and Yellow grounding wire connected to
grounding lug on mount.
Installing Accessories
Accessories can be mountied directly to the PAC510, PAC515,
and PAC520 by using the mounting screws provided and the
mounting holes intergrated into the box.
To mount an accessory:
1. Identify area within accessory box that accessory is to be
mounted.
2. Align the mounting holes in accessory with mounting holes
in box.
3. Secure accessory to box using Phillips screwdriver and as
many 1/8-18 x 3/4" mounting screws (8 provided) as
required.
NOTE: The top and bottom slots in the side flanges of PAC510
are designed to hall at the center of the studs on 16"
centers. When installing a mount over the top of
PAC510, align mounting holes in mount with top and
bottom slots in side flanges and secure using hardware
specified in the Installation Instructions provided with
the mount.
Figure 4
Typical
2
1
2
1
2
1
Grounding lug location
PAC-510
PAC-520
PAC-515
Figure 5
(E) (8 provided)