Filter
Top Products
2-20
Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0
OL-12397-13
Chapter 2 SIP Subscribers
Cisco BTS 10200 Softswitch-Based Features
Note Forwarding to a URL address of record (AOR) is not supported.
SIP subscribers do not hear a final dial tone upon completing activation or deactivation. Instead, an
announcement plays for the subscriber, indicating that the status of the forwarding feature is being
activated or deactivated. This is irrespective of the Final Stage Dial Tone (FDT) flag (Y/N) provisioned
for these features.
Call Forwarding to an E.164 Number or an Extension Number
Activation and deactivation are accomplished using single-stage dialing.
Detailed Provisioning Procedure and Feature Description
Additional information on this feature is provided at the following links.
Calling Name and Number Delivery
Calling number delivery (CND) provides the SIP subscriber endpoint with the calling number of an
incoming call. Calling name delivery (CNAM) provides the endpoint with the name of the calling party.
CND
The calling party number, if available, is delivered in the From header of the outgoing INVITE from the
BTS 10200 to the terminating SIP phone. The number is delivered to the SIP phone even if the CND
feature is not provisioned for the subscriber. The delivered information is as follows:
• If the calling number is available and the presentation indication is not restricted, the number is
inserted into the user information portion of the From header.
• If the calling number is available and the presentation indication is restricted, the user information
portion of the From header is set as “Anonymous.”
• If the calling number is not available, the user information portion of the From header is left empty.
CNAM
The calling party name is delivered in the outgoing INVITE from the BTS 10200 to the terminating SIP
phone only if the CNAM feature is provisioned for the SIP subscriber. The delivered information is as
follows:
• If the calling number and name are available and the presentation indication of both the calling
number and calling name are not restricted, the calling name is inserted into the display name field
of the From header.
Provisioning Procedure
Feature Behavior (Feature Description and
Handset Provisioning)
Call forwarding sections in the
Cisco BTS 10200 Softswitch Provisioning Guide
“Call Forwarding Features” section in the
Cisco BTS 10200 Softswitch Network and
Subscriber Feature Descriptions document