Filter
Top Products
Process and Memory Management Commands on Cisco IOS-XR Software
show memory
SMR-286
Cisco IOS-XR System Management Command Reference
show memory
To display the available physical memory on the networking device and the memory usage of processes
on the networking device, use the show memory command in EXEC mode.
show memory [job-id | location node-id | summary]
Syntax Descriptionl
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.
Examples The following is partial sample output from the show memory command entered without keywords or
arguments:
RP/0/RP1/CPU0:router# show memory
Physical Memory:2048M total
Application Memory :1802M (1636M available)
Image:116M (bootram:116M)
Reserved:128M, IOMem:0, flashfsys:0
Total shared window:0
kernel:jid 1
Address Bytes What
0008f000 12288 Program Stack
000b2000 12288 Program Stack
Total Allocated Memory:0
Total Shared Memory:0
sbin/devc-pty:jid 68
Address Bytes What
4817f000 4096 Program Stack (pages not allocated)
48180000 516096 Program Stack (pages not allocated)
481fe000 8192 Program Stack
48200000 28672 Physical Mapped Memory
job-id (Optional) Displays the memory available and memory usage information for
only the process associated with this job identifier. If the job-id argument is not
specified, this command displays information for all running processes.
location node-id (Optional) Displays the available physical memory from the designated node.
The node-id argument is entered in the rack/slot/module notation.
summary (Optional) Displays only a summary of the physical memory and memory usage
information.
Release Modification
Release 2.0 This command was introduced.