Filter
Top Products
Care and Cleaning
REPLACING THE FILTER
Filters are available at various retailers or by visiting our website at
clear2o.com.
For best results, the filter should be replaced after 40 gallons of consumed
water. Unlike some other product filters that estimate filter life base on
time, the intelligent-filter indicator in your system measures the
amount of water you use, resulting in a better value for your money--you
will not replace the filter unless you really have exceeded the
recommended filter capacity; therefore, it will last much
longer.
Intelligent-Filter Indicator
Your unit has an Intelligent-Filter Indicator built into the filter cover that
automatically activates the flow meter indicator and resets it every time
you install a new filter. This makes it easy to know exactly when to
replace the filter (L).
• As soon as you install the filter, the indicator turns green for 30 gallons
of water consumption then it changes to yellow for 10 more gallons
of water.
• Once indicator turns red, it is time to replace the filter.
1. To remove the filter:
a. Lift the filter lid to open.
b. Turn the bar on the filter counterclockwise to the (unlocked
symbol) position.
c. Keep turning the bar until filter is released.
d. Pull out filter and discard.
2. To install the filter, follow steps 2-5 under "Installing the Filter".
TROUBLESHOOTING
Filter lid does not close. Make sure the filter is securely locked
in place. Verify the bar on the filter is fully
aligned with the (locked symbol.
Not able to attach Follow instructions for Attaching
connector to the faucet Connector to Faucet.
Water leaks or sprays Verify that you placed the washer
from connection at faucet between the faucet and the adapter.
Cannot remove the filter Turn filter bar pass the unlock position
and keep turning until filter is released.
L
GREEN
good for 30 gallons
L2
RED
It’s time to replace filter
L1
YELLOW
good for 10 more gallons
7
8
CLEANING
Pitcher
1. To remove the lid assembly:
a. Using your index finger, lift the filter lid to open.
b. Grasp the top bar on the filter and pull it
straight up to disengage the lid assembly from
the pitcher (M).
Important: Be sure the filter is locked in place.
2. Empty pitcher and hand-wash with mild
detergent and water. Do not wash in the
dishwasher.
Lid and Filter Reservoir. Wipe lid and outside surface of filter reservoir
with a damp cloth. Do not wash in the dishwasher.
M
CWS100APub1000002828 2/23/06 7:12 AM Page 8