The Coleman Co., Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A.
1-800-835-3278 • TDD: 316-832-8707
©2003 The Coleman Company, Inc. All Rights reserved.
Coleman® is a registered trademark of The Coleman Company, Inc.
For information regarding other
Hot Water on Demand
TM
accessories:
Visit us at
www.coleman.com
2300-052 (05/03)
Maintenance:
To Clean:
1. In a clean container mix one-gallon of water with 6 oz. of a calcium, lime, and rust remover solution
(available at hardware, general merchandise and food stores).
2. Disconnect water hose adapter from unit.
3. Unscrew water tubing from adapter body.
4. Detach clips from water tubing.
5. Submerge water tubing in cleaning solution. Allow to set five (5) minutes.
6. Run clean water through water tubing.
7. Air dry.
8. Reattach tubing to Water Hose Adapter and reattach clips to water tubing.