Filter
Top Products
MATERIAL USAGE INFORMATION
Pressing the VIEW key followed by the * key will cause all material
usage totals to be printed. The (*54) flag need not be on. These
totals are since the last time printed, and since the last time
cleared.
This same information may be periodically, and automatically, printed
by setting the PRT parameter to a time interval number. (See
PARAMETER, PRT)
The printout looks like this:
DATE TIME TOTALS: GRAND PCT CURRENT PCT
CURRENT 11/01/90 18:26:45 CYCLES 83 1
LAST PRINTED 11/01/90 18:19:59 REGRIND 6.2 .4 0.0 0
LAST CLEARED 10/30/90 20:02:36 NATURAL 1485.4 19.0
COLOR 15.3 1.01 0.2 1.0
WEIGH SCALE ID# 120 ADDITIVE 0.0 .00 0.0 .00
TOTALS ARE IN POUNDS TOTAL 1506 19
POUNDS PER HOUR 286.2
The Totals may be in POUNDS or KILOS depending on your selection of
weight unit using the *89 function in the PROGRAM mode.
The POUNDS PER HOUR is based on the total material throughput since the
last time totals were printed. Cycle time variations will cause
this number to not be exact. The longer the time period, the more
correct the rate.
GRAND totals are totals since the last time the data was cleared using
the *00 routine, or by pressing 00 immediately after executing this
print routine.
CURRENT totals are totals since the last time a printout was obtained.
Page 78