• Avoid contact with moving parts.
• Always operate blender with cover in place.
• Always operate the product on a at, level, stable surface to avoid overturning it.
• Ensure the product is off before adding or removing parts. Do not attempt to place
the Pitcher onto the Base while the motor is running. Do not attempt to remove the
Pitcher from the Base while the motor is running.
• Correctly attach the blade assembly to the pitcher correctly before putting the
Pitcher onto the Base. To reduce the risk of injury, never place cutter- assembly
blades on the base without pitcher properly attached.
• When blending hot liquids, remove center piece of two-piece cover.
• After operating continuously for three minutes, wait at least one minute before
operating the product again to help prevent the motor from overheating.
• Do not run motor while Pitcher is empty.
• This product is intended for indoor, non-commercial, non-industrial, household
use only. Do not use outdoors.
• Do not let cord hang over the edge of a table or counter.
• This product uses a short power cord to reduce the risk of personal injury resulting
from becoming entangled in or tripping over a longer cord.
WARNING: This product is equipped with a polarized plug (one blade is wider than
the other blade) to reduce the risk of electrical shock. This is a safety feature. The
plug will t into a polarized outlet only one way. If you are unable to insert the plug
into the electrical outlet, try reversing the plug. If the plug still does not t, contact
a qualied electrician. Never use the plug with an extension cord unless you can
fully insert the plug into the extension cord. Do not alter the plug. Do not attempt
to defeat the safety purpose of the polarized plug.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE
2