Filter
Top Products
PART IDENTIFICATION:
1. Ground stainless steel blades
2. Blade releasing switch
3. ON/OFF button
4. Handle
WARNING: THIS PRODUCT IS NOT INTENDED FOR
USE BY CHILDREN.
BEFORE FIRST USE:
Wash detached blades in hot, soapy water. Rinse, and then dry thoroughly. H andle
knife blades with care, as they are extremely sharp.
HOW TO ASSEMBLE AND USE:
CAUTION: Be sure cord is not connected to p ower outlet when removing or
inserting blades and / or when knife is not in use. Th e blades are extremely sharp.
Always handle blades by dull edge (side opposite the cutting edge) or by the
protective sleeve.
up blades by the protective sleeve. Slide the rivet on one blade into the keyhole
slot of the other blade until they are locked together.
Always use bot h blades when operating the knife. If blades are separated, pick
1.
knife, and pus h into position until a click is heard. It will be found that pushing
the blades by the finger grips w ill facilitate fitting.
Keep the protective sleeve on the blades, carefully insert the free ends into the
2.
2
no encajara, póngase en contacto con un electricista calicado. No intente
modicar el enchufe de ninguna manera.
IDENTIFICACIÓN DE PARTES
1. Cuchillas de acero inoxidable
2. Botón para soltar las cuchillas
3. Botón de encendido ON/OFF
4. Mango
ADVERTENCIA: ESTE PRODUCTO NO HA SIDO DISEÑADO
PARA SER UTILIZADO POR NIÑOS
ANTES DEL PRIMER USO
Lave las cuchillas en agua caliente jabonosa. Enjuáguelas y luego séquelas
totalmente. Manipule las cuchillas con cuidado ya que son muy aladas.
CÓMO ARMAR Y UTILIZAR
Precaución: Asegúrese de que el aparato no se encuentre enchufado al
momento de retirar o colocar las cuchillas y/o cuando el cuchillo no se esté
utilizando. Las cuchillas son muy aladas. Manipule las cuchillas por el lado
romo (el lado opuesto al borde para cortar) o utilice la manga protectora.
1. Siempre utilice ambas cuchillas al momento de usar el cuchillo. Si las
cuchillas se separaran, manipule las cuchillas utilizando la manga protectora.
Deslice y encaje el remache de una cuchilla dentro del agujero o ranura de la
otra cuchilla hasta que queden bien aseguradas.
2. Mantenga la manga protectora sobre las cuchillas. Con cuidado inserte el
extremo que se encuentra libre dentro del cuchillo. Presione hasta encajar.
Empuje las cuchillas sujetando con los dedos para facilitar su encaje.
PART IDENTIFICATION:
1. Ground stainless steel blades
2. Blade releasing switch
3. ON/OFF button
4. Handle
WARNING: THIS PRODUCT IS NOT INTENDED FOR
USE BY CHILDREN.
BEFORE FIRST USE:
Wash detached bla des in hot, soapy water. Rinse, and then dry thoro ughly. Handle
kn ife blades with care, as the y are extrem ely sharp.
HOW TO ASSEMBLE AND USE:
CAUTION: Be sure cord is not connected to power out let when removing or
in serting blades and / or when knife is not in use. The blades are extremely sharp.
Al ways handle blades by dull edge (side opposite the cutting edge) or by the
pr otective sleeve.
up blades by the protective sleeve. Slide the rivet on on e blade into the key hole
sl ot of the ot her blade until they are locked together.
Al ways use both blades whe n operating the knife. If blades are separated, pick
1.
kn ife, and push into posit ion until a click is heard. It will be found that pushing
th e blades by the finger g rips will facili tate fitting.
Ke ep the protective sleeve on the blades, carefully insert the free ends into the
2.
2