Creda C150 Cooktop User Manual


 
22
Installation Instructions
After installation, check for gas soundness. The supply pressure can be
checked at the grill injector. Access to the injector is by first removing
the baffle at the front of the grill fastened by two screws. Then remove
the fastening screw on the right hand side of the burner and slide the
burner off the injector. Ensure that the grill burner is correctly located
under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan
supports. Referring to the instructions for use where
necessary.
1. Check that the hotplate and grill burners ignite correctly and
burn with a steady flame. Check for a steady flame on the
low setting.
2. Check that with the oven set to mark 9, the burner ignites at
low rate, and then increases to full rate within 60 seconds.
Leave the oven full on with the door closed for 10 minutes, and
check that when the control is turned to the ‘Slow Cook’
setting that the flame reduces.
Instruct the user on the operation of the cooker.
Operational
Checks