Creda C361E Cooktop User Manual


 
17
Know your Timer
(C361E & C461E)
CLOCKFACE
The timer incorporates a 24 hour clock.
Ensure the correct time of day is always set,before using you cooker.
PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00
HOURS AND 06.00 HOURS TO PREVENT GL
ARE.
However,should you operate the timer during these hours the display will
return to normal brightness for a few seconds and then dim again.
SYMBOLS
will light up when you select a Minute Minder Period and will remain lit for the
period set.At the end of the Minute Minder Period,the timer will emit an audible
tone for 2 minutes,the symbol will start to flash and will continue to flash until
the Minute Minder function is cancelled.
This “Cookpot”symbol will light up either:–
When you press the Cook Period Button and set a length of time for an Auto
Cooking Programme.(It will go out again a few seconds after you release the
timer buttons).
During the actual Cook Period.
“AUTO”will light up:–
When the timer is first turned on it will flash.(It will go out when a time of day
is set.
When an Auto Cooking Programme has been set.
The “Auto”symbol will flash at the end of an Auto Cooking programme to indicate
that the programme has finished.
(When the “Auto”symbol is flashing, to return the oven to Manual operation,
turn the oven controls off,ensure that the correct time of day is set,and press the
“Manual”button twice – The “Auto”symbol will go out).
Here you can set a time period of up to 23 hours 59 minutes,that will count down.
When it reaches zero,the timer will emit an audible tone.
For Example:If you set 20 minutes,the audible tone will occur 20 minutes later.
Cook Period is the actual length of time for which,the timer will switch the oven(s) on
as part of an “Auto Cooking”programme.
(e.g.If you set 2 hours,the food will be cooked for 2 hours).
The time of day at which you want an “Auto Cooking”programme to end
.
For Example:If you set a “Cook Period”for 2 hours,and “End Time”of 11:00.The timer
will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00.You will hear a
audible tone at 11:00,to indicate that the Auto Cooking Programme has finished.
Notes:
- When setting an Auto Cooking programme you will need to set the oven
controls(s) to the required temperature(s) when you set the timer.
- If an Auto Cooking programme has been set the oven(s) will only operate during
the pre-programmed time.
Needs to be pressed to cancel an Auto Cooking programme and return the ovens(s)
to Manual operation.
Used to adjust the various timer function settings.
Minute Minder
Button
Cook Period Button
End Time Button
Manual Button
“+” and “–” Buttons
TIMER FUNCTION BUTTONS
AUTO COOKING PROGRAMME
Note: If at any time the display shows a ‘KEY’symbol,it is likely that the timer has been set incorrectly. OVEN
COOKING ISNOTPOSSIBLE. The ‘KEY’symbol can be deleted and the cooker returned to manual operation by:
- Simultaneously pressing the Minute Minder and the Cook Period buttons for a period of approximately 8
seconds.
- Releasing the buttons and pressing the ‘+’button.