Creda CF50E Cooktop User Manual


 
Speedgrill
IMPORTANT
CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE
GRILL IS IN USE. CHILDREN SHOULD BE KEPT AWAY.
Your cooker is not fitted with a conventional type of grill. Creda
have developed a high speed grill, which is designed to reduce your
grilling times. It is quicker because it takes less time to warm up
from cold. Conventional grills require 5 minutes preheat before food
is placed beneath them, but for normal grilling the Speedgrill can
be used directly from cold, without any preheat.
However, when toasting, optimum performance is achieved by pre-
heating the grill for about 1 minute.
You will notice that the grill elements are protected by a wire mesh.
Under no circumstances should pointed objects be inserted into the
mesh. During use, the mesh may become soiled. Do not attempt to
clean it while the grill is still on. Turn the cooker off at the control
unit and wait until it has cooled down before cleaning.
Care must be taken to ensure the mesh is not distorted - do not store
the grill pan handle on the grill pan grid when the rod shelf is in the
top runner position.
There are two halves to the grill, one on the left and one on the right.
You can choose to have both sides on, or just the left side on.
Turning the control knob clockwise will switch both sides on.
Turning it anti-clockwise, will only switch the left side on.
The numbers indicate the heat setting, 4 is the hottest and 1 the
coolest.
18
GRILLING CANNOT BE UNDERTAKEN WITH THE GRILL DOOR
CLOSED.
Grilling procedure:
1. Open the grill door fully.
2. Position the rod shelf as recommended in the Guide to Grilling
chart, for the food being cooked.
3. Place the grill pan on the rod shelf, ensuring it is positioned
centrally under the grill element.
4. Never line the grill pan with aluminium foil, as this may cause
overheating of fat in the grill pan.
Note: To stop fat splashing onto the grill element mesh, it is
important to use the anti-splash tray. Always clean the grill pan anti-
splash tray and food grid after each use.
DO NOT under any circumstances insert objects into the grill mesh
as this could damage the glass tubes.