Creda X153 Cooktop User Manual


 
Care and Cleaning
16
COOKER FINISH CLEANING METHOD
Vitreous Enamel
Hotplate, burner caps, grill
pan, oven base and rear,
inside of grill compartment,
inside of doors, control panel.
Cloth wrung out in hot soapy water. Stubborn
stains can be removed with a cream paste,
liquid cleaner or by rubbing with fine steel wool
soap pads.
Check that the cleaning agent is approved by the
Vitreous Enamel Development Council.
Paint
Plinth, Fascia bottom trim,
side panels, Door fronts (C150).
Lid trim, Rear end caps
(models with hotplate lid)
Wash with a cloth wrung out in hot soapy water only.
DO NOT USE ABRASIVES.
Aluminium
Hotplate burner bodies
Similar to paint cleaning above. Use a nylon brush to
remove any cleaning materials, water or dirt from the
hotplate burners.
Chromium Plating
Oven shelves, grill pan grid,
grill pan handle
support
Wipe with a cloth wrung out in hot soapy water.
A fine steel wool soap pad or a chrome or stainless
steel cleaner may be used.
Plastic
Grill pan handle, door
handles, control knobs
NOTE: To ensure rapid lighting of the hotplate burners every time they are used, the electrodes
must be kept clean and dry. Remove any food spillage or cleaning materials from the electrode
using a small nylon brush such as a tooth brush.
Wipe with a cloth wrung out in hot soapy water.
Stubborn stains can be removed with a cream
cleaner.
Glass
Lid if fitted
Door fronts (X/L153)
Wash with cloth wrung out in hot soapy water only.
Do not use ABRASIVES. Polish with a dry cloth or
kitchen towel.