Filter
Top Products
-6- -7-
• For use only with ceramic-type slow cookers.
• Do not overload. For use only with slow cookers rated 400 watts
(3.3 amps) or less.
•Not for use with slow cookers that have their own electronic or
mechanical timers or other electrical features or accessories.
• This appliance is provided with a polarized receptacle for a slow
cooker. If the slow cooker plug does not fit fully into the receptacle,
reverse the slow cooker plug.
Never Immerse your Smart-Part™ Module in water or any other liquid.
HOW TO USE YOUR SMART-PART™ PROGRAMMABLE MODULE
If you need to remove food or other stains from your Smart-Part™
Module gently wipe it with a damp cloth. Make sure the Smart-Part™
Module is thoroughly dry before use.
CLEANING YOUR SMART-PART™ PROGRAMMABLE MODULE
QUESTIONS AND ANSWERS
Q
“What if the food isn’t done after cooking the amount of time
recommended in the recipe?”
A
This is due to voltage variations which are commonplace
everywhere; altitude; or even extreme humidity. Personal preference
also plays a part in the “doneness” of food. The slight fluctuations
in power do not have a noticeable effect on most appliances;
however, it can slightly alter the cooking times in the Smart-Part™
Module due to extended cooking times. If this happens, simply
adjust the Smart-Part™ Module setting on next use.
Q
“Must the slow cooker be covered? Is it necessary to stir?”
A
Cook with the cover on. The slow cooker will not recover heat
losses quickly when cooking. Significant amounts of heat escape
whenever the lid is removed; therefore the cooking time must be
extended. Avoid frequent removal of the cover for checking
cooking progress or stirring. Never remove cover during the first 2
hours when baking breads or cakes. It is not necessary to stir while
cooking.
Q
“My Rival or other brand model number is not listed on your
model number chart. What should I set it on?”
A
Start on setting “C”, and adjust to “B” or “A” if needed on your
next cooking cycle.
SP100.02.US.OM3 5/28/02 4:03 PM Page 6