Filter
Top Products
ENGLISH
6
C. OPERATION
1. TO PROGRAM A
NEW PRESET MENU
SELECTION:
Perform the procedure in Part E, Programming Preset Menu Selections, in this Section. At least
one menu selection MUST be programmed before the oven can be operated.
Perform the procedure in Part E, Programming Preset Menu Selections, BUT press
instead
of
(in Steps 3 and 8). Instead of permanently overwriting the menu selection, the new set
temperature and cook time settings are only temporary. To cancel the temporary menu selection,
press any preset menu key or disconnect electrical power to the oven.
2. TO TEMPORARILY
OVERRIDE A PRE-
SET MENU SELEC-
TION:
a. Press
(or any other preset menu key). The display will read . The number
in the display (1 is shown above) will match the menu key that was pressed (1-5).
b. Wait for the
light to illuminate. The light will illuminate after both heating zones
reach their set temperatures.
c. Load the product onto the conveyor.
3. TO CHOOSE A PRE-
SET MENU SELEC-
TION:
a. Choose a preset menu selection, and wait for the
light to illuminate.
b. Press
. and will alternate in the display. The number in the
display (1 is shown above) will match the current menu selection (1-5).
c. Load the pizza product onto the conveyor.
IMPORTANT
After 1/2 of the cook time has elapsed, the temperature of the top zone will be automatically
lowered. After the entire cook time has elapsed, the program will return to its normal top zone
temperature.
After
is pressed, the menu selection cannot be changed until the cook time has elapsed.
4. TO COOK A SINGLE
PIZZA, OR THE LAST
OF A GROUP OF PIZ-
ZAS:
5. TO VIEW THE SET
TEMPERATURES:
6. TO VIEW HEATING
ZONE REFERENCE
TEMPERATURES:
Press either
or . The top or bottom set temperature will be displayed for 5 seconds.
D. SHUTDOWN PROCEDURE
1. Switch the Power On/Off (I/O) switch to the OFF (O) position.
2. Wait for the ovens cooling fan to turn off.
3. Disconnect electrical power to the oven at the circuit breaker/fused disconnect.
7. TO VIEW THE COOK
TIME:
Press
+ or + . The top or bottom reference temperature will be displayed
for 5 seconds.
Press
. The cook time will be displayed for 5 seconds.