Cuisinart 05CU26037 Blender User Manual


 
6
Note: To remove blender jar cover, lift edge of cover upwards. Lifting
measured pour lid will not remove cover.
3. To start blending: Choose a speed for blending your ingredients.
Press the ON button for continuous blending. The LED light will
illuminate when the blender is on.
4. To stop blending: To stop the blending process, push the STOP
button.
5. Pulse Mode: The pulse mode allows you to create a burst of power
for quick, efficient blending. To use the pulse function, choose a
speed for blending your ingredients. Push and release the PULSE
button. Repeat as desired. You determine the duration of each
pulse. While you are pulsing, the LED indicator light will glow. The
pulse function can be used to break apart larger pieces of food or
to control the texture of food when chopping. The pulse function is
also effective in starting the blending process when you do not
want continuous power, or when processing items that do not
require an extended amount of blending.
6. To crush ice: The Cuisinart
®
SmartPower Classic
Blender motor
is strong enough to crush ice without liquid at any speed; however,
for your convenience, we have preset the best speed for ice crush-
ing. To give you greater control, the ice crush function automatically
operates as a pulse function. To crush ice, place ice cubes in the
blender jar, and place the cover and the measured pour lid on the
blender jar. Press the ICE CRUSH button. Press the ICE CRUSH
button in short pulses until ice is crushed to desired consistency.
See the Recipe Tips section on page 8 for more details.
7. To dislodge food: Use a rubber or plastic spatula to help remove
food lodged around the cutting assembly. DO NOT USE SPATULA
UNTIL YOU HAVE TURNED THE BLENDER OFF BY PRESSING
STOP BUTTON. Replace the cover and measured pour lid and
continue blending, if necessary. Make sure spatula is not inside the
blender jar before blending.
8. When finished blending: Press the STOP button and unplug the
blender from the electrical outlet. Never remove the blender jar
from the motor base until the blender is off. Do not twist locking
ring off blender jar when removing jar from motor base. Simply lift
blender jar from motor base. Do not place hands into blender jar
with blender plugged in.
CLEANING AND MAINTENANCE
Always unplug your Cuisinart
®
SmartPower Classic
Blender from the
electrical outlet before cleaning. The blender is made of corrosion-
resistant parts which are easy to clean. Before first use and after every
use, clean each part thoroughly. Periodically check all parts before
reassembly. If any part is damaged or blender jar is chipped or
cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting straight up and
away. Twist off the locking ring by turning counterclockwise. Remove
the cutting assembly and rubber gasket. Wash in warm soapy water,
rinse, and dry thoroughly.
Place the locking ring in the upper rack of the dishwasher or wash in
warm water.
CAUTION: Handle the cutting assembly carefully. It is SHARP and may
cause injury. Do not attempt to remove blades from cutting assembly.
Remove the blender jar cover and the measured pour lid. Wash in
warm, soapy water; rinse and dry thoroughly, or place in upper rack of
dishwasher. The blender jar must be washed in warm, soapy water and
rinsed and dried thoroughly. The blender jar can also be placed upside
down in dishwasher.
Finally, wipe the motor base clean with a damp cloth to remove any
residue, and dry thoroughly. Never submerge the motor base in water
or other liquid, or place in a dishwasher.