Cuisinart CGR-4C Griddle User Manual


 
OPERATING
INSTRUCTIONS:
Once the Griddler
is assembled properly and
you are ready to begin cooking, turn the Selector
to the left to choose the Griddle
function or to the right to choose the Grill/Panini
function, depending on what you intend to cook.
When the knob is turned to either function,
a red indicator light will illuminate to indicate
that the power is on.
If you intend to use the Griddler
as a Contact
Grill, Panini Press or Open Grill, turn the
Grill/Panini Control to the desired temperature
for cooking. Settings range from Warm (150°F)
to Sear (450°F).
If you intend to use the Griddler
as a
Griddle, turn the Griddle Control to the desired
temperature for cooking. Temperature settings
range from 200°F to 425°F.
It may take up to 10 minutes to reach
operating temperature, depending on the
temperature level that was set. When the
thermostat has reached operating temperature,
a green indicator light inside the chosen control
will indicate that the Griddler
is ready for cook-
ing. During operation, the light will continue to
turn on and off as the thermostat regulates the
temperature. This is normal.
The temperature controls are used to set and
maintain the temperature of the cooking surface.
You may vary the setting of the control knob at
any time during cooking, and may wish to do so
depending on the types of foods on the cooking
plate. Refer to the Cooked Food Temperature
Chart of the Recipe Book for recommendations.
NOTE: The first time you use the Griddler
, it
may have a slight odour and may smoke a bit.
This is normal and common to appliances with
nonstick surfaces.
User Maintenance:
* Never use metal utensils, as they will scratch
the nonstick grill plate. Instead, use only
wooden or heat-proof plastic utensils.
* Never leave plastic utensils in contact with the
hot grill plate.
* In between recipes, scrape excess food
buildup through grease channel and into drip
cups, then wipe off any residue with a paper
towel before proceeding with next recipe.
CLEANING AND CARE:
CAUTION: BEFORE CLEANING APPLIANCE,
MAKE SURE IT HAS COOLED DOWN
COMPLETELY.
Once you have finished cooking, turn the
Selector Control to the OFF position and
unplug the power cord from the wall outlet.
Allow the unit to cool down for at least
30 minutes before handling.
Use the cleaning/scraping tool to remove
any leftover food from the cooking plate.
The scraping tool can be washed by hand
or in the dishwasher.
Dispose of grease from drip cups. The drip cups
can be cleaned by hand or in the dishwasher.
Press the Plate Release Buttons to remove
plates from the housing. Be sure that the plates
have cooled completely before handling
(at least 30 minutes). The cooking plates can be
washed in the dishwasher. Do not use metallic
objects such as knives or forks for cleaning.
Do not use a scouring pad for cleaning.
The nonstick coating can be damaged.
If you have been cooking seafood, wipe the
cooking plate with lemon juice to prevent
seafood flavour transferring to the next recipe.
The housing base, cover and control knobs can
be wiped clean with a soft, dry cloth. For tough
stains, dampen cloth. Never use an abrasive
cleaner or harsh pad.
STORAGE:
Always make sure the Griddler
is cool and dry
before storing.
The power cord can be wrapped around the
back of the base for storing.
One set of cooking plates should be stored in
the Griddler
when not in use. The other set can
be stored in a drawer or cabinet, along with the
drip cups and scraping tool.
WARRANTY
Limited Three-Year Warranty
This warranty is available to consumers only.
You are a consumer if you own a Cuisinart
Griddler
that was purchased at retail for
personal, family or household use. This warranty
is not available to retailers or other commercial
purchaser or owners.
We warrant that your Cuisinart
Griddler
will
be free of defects in materials and workmanship
5
IB-5280-CAN(0,1)UK_8PP 5/24/04 10:12 AM Page 6