Cuisinart CSB-76 Blender User Manual


 
7
OPERATION
The specially designed blade is for mixing and stirring all kinds of foods,
including salad dressings, powdered drink products, and sauces. It is
ideal for combining dry ingredients, and can be used to emulsify
mayonnaise, too.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the most
flavorful, full-bodied liquid recipes. Be careful never to remove the
Cuisinart
®
Smart Stick
®
Hand Blender from the liquid while in operation.
1. Insert the blending attachment into the motor body. (See Assembly,
page 6.)
2. Plug electrical cord into an electrical wall socket.
3. Place blending shaft into mixture that will be blended.
4. Press and hold the ON/OFF button. The hand blender will continue to
run as long as the switch is pressed in. To turn hand blender OFF,
release the ON/OFF button and the motor will stop.
5. Do not hold the button ON for longer than 50 seconds at a time.
6. Unplug immediately after use.
CLEANING
Always clean the Smart Stick
®
motor body and blending shaft thoroughly
after using.
Remove the blending shaft from the motor body. Clean the motor body
only with a sponge or damp cloth. Do not use abrasive cleaners which
could scratch the surface. To clean the blending shaft, wash by hand in
hot water using mild detergent, or in dishwasher.
Never immerse the motor body in water.
When the appliance has malfunctioned or has been dropped or damaged
in any way or it is not operating properly, return the appliance to the
nearest Cuisinart Repair Center for examination, repair or mechanical
or electrical adjustment.