Filter
Top Products
OPERATION
BLENDING
Blending & Mixing
The specially designed blade is for mixing and stirring all kinds of
foods, including salad dressings, powdered drink products, and sauces.
It is ideal for combining dry ingredients, and can be used to emulsify
mayonnaise, too.
This blade mixes and stirs while adding only a minimum of air to
your mixture. A gentle up-and-down motion is all you need to make
the most flavorful, full-bodied liquid recipes. Be careful never to
remove the Cuisinart
®
Smart Stick
®
Hand Blender from the liquid
while in operation.
1. Insert the blending attachment into the motor body. (See Assembly
for Blending Attachment, page 8.)
2. Plug electrical cord into an electrical wall socket.
3. Place blending shaft into mixture that will be blended.
4. Press and hold the ON/OFF button. The hand blender will continue
to run as long as the switch is pressed in. To turn hand blender OFF,
release the ON/OFF button and the motor will stop.
5. Do not hold the button ON for longer than 50 seconds at a time.
6. Unplug immediately after use.
WHISKING
1. Insert the whisk attachment into the motor body. (See Assembly for
Whisk Attachment, page 11.)
2. Plug electrical cord into an electrical wall socket.
3. Place the whisk into mixture that will be blended.
4. Press and hold the ON/OFF button. The hand blender will continue
to run as long as the switch is pressed in. To turn hand blender OFF,
release the ON/OFF button and the motor will stop.
5. Do not hold the button ON for longer than 20 seconds at a time.
See Recipes.
6. Unplug immediately after use.
CHOPPING AND GRINDING
Processing Food
1. Place the prep bowl firmly on a flat sturdy surface like a countertop.
Be sure the blade is assembled to use the blade edge that is
appropriate for the food to be processed.
12