Filter
Top Products
5
MODE SELECTION PROCEDURE
Default setting: Mode 1
1. Press Preset button.
2. Choose Mode Number (1-8) by pressing Preset button repeatedly. Selected mode number
will blink for approximately 5 seconds.
3. LED display will show the corresponding preset temperature of the selected mode. It will
remain on until the chosen mode is selected.
Adjusting the temperature (manual setting)
Default setting: 7°C (45°F)
1. Press Manual Set button.
2. Press (+) or (-) button to adjust the temperature.
3. Press Manual Set for conrmation.
4. Temperature on LED display will remain on until the chosen mode is selected.
Choosing Fahrenheit or Celsius
Default setting: °C
1. Press °C/°F button to select temperature unit.
Controlling interior display light
Default setting: Light is off when door is closed/light is on when door is open.
1. Press the Display Light button to keep display light on all the time.
2. Press the Display Light button to return to default setting .