Cuisinart DCC-1200 Series Coffeemaker User Manual


 
5
CONTROL PANEL
1
2b
2a
2c
5
3
8
6
7
2e
1. Clock Display
Displays time of day and auto on and off
times.
2. Function Knob
For setting time of day, and auto on and auto
off times.
a. Auto On
The Auto On feature is used to program the
start time of the brew cycle. The auto on
time can be set for any time, day or night.
The “PM” indicator is displayed on the LCD
for nighttime program times.
b. Auto Off
The Auto Off feature is used to shut off the
coffeemaker at a preset time, anywhere
from 0 to 4 hours.
c. Program Set
The Program Set function is used to set the
time for the Auto On function.
d. Brew
The Brew function is used to start the brew
cycle directly.
e. Clock Set
Used to program the time of day.
f. Audible Tone (not shown)
The Brew Central
Coffeemaker is
equipped with an audible tone which will
sound 5 times when the coffee has com-
pleted brewing (coffee will continue to
stream from the filter for a few seconds
after tone).
3. Flip Switch
Retro-style flip switch is used to turn your
coffeemaker on and off and works in tandem
with the function knob.
4. Heater Plate Control Knob
For controlling the temperature of the coffee
after brewing. It has high, medium and low
settings.
5. Hour and Minute Buttons
For use in setting hour and minute for time
of day, auto on time, and auto off time.
6. On and Auto On Indicator Lights
7. Self Clean Setting
Used for removing calcium buildup.
8. 1-4 Cup Setting
For brewing smaller pots of coffee –
it provides ‘double’ heating of the water, so
coffee is piping hot.
2d
4
03CU13529 DCC-1200 IB REV 8/7/03 12:32 PM Page 6