Filter
Top Products
8
PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. Turn the function knob to “Brew.”
2. Press the On/Off button and release. The
red “On” indicator light will illuminate and
brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Press the On/Off button and release.
Note: This coffeemaker shuts off
automatically after brewing is complete.
PROGRAMMING YOUR
COFFEEMAKER FOR DELAYED
BREW TIME
To set the time:
1. Turn the function knob to “Clock.”
a. Set Hour: Press and hold the “Hour”
button to scroll through numbers
quickly. When number displayed
approaches the desired setting, press
and release (pulse) the button to
advance one digit at a time. After setting
the correct hour, the default will be the
last time set unless power is shut off.
Note: When the number count passes 12,
the PM light will be displayed on the LCD.
b. Set Minutes: Press and hold the
“Minute” button to scroll through
numbers quickly. When number
displayed approaches the desired
setting, press and release (pulse) the
button to advance one digit at a time.
After setting the correct minute, the
default will be the last time set unless
power is shut off. To finish setting time,
turn the FUNCTION KNOB to any other
setting or simply wait until the numbers
stop blinking.
To program the Auto On (brew start time)
1. Turn the function knob to “Prog.”
2. Set the time you want coffee to begin
brewing by using the minute and hour
push-buttons. Follow the same
instructions you used to set the time of
day, in the To set the time section
above.
3. Turn the function knob to “Auto On.” LCD
will display the current time.
4. Press the On/Off button and release. The
green indicator light will come on to
remind you that the programming
function is in use. At the programmed
time, the red indicator will come on as
well, indicating that the brew cycle is
starting. Both lights will go off when the
brew cycle is complete.
NOTE: To reactivate the auto-on feature to
start brew cycle at the same time another
day, simply press the On/Off button and
release. The green “auto-on” light will
illuminate.
1 - 4 Cup Setting
The 1-4 cup setting button is used when you
make small amounts of coffee. The 1-4 cup
setting basically ‘double heats’ the water,
making your smaller amount piping hot.
To use: When making a smaller amount,
press the 1-4 button on the control panel
after turning on the unit.
Power Loss Back-up
One-minute protection in case a breaker
trips, the unit is unplugged, or the power
fails. It holds all programmed information,
including time of day, auto on time and auto
off time.