Filter
Top Products
9
calcium deposits which form over time on
the metal parts of the coffeemaker.
For best performance from your Brew
Central
®
Coffeemaker, decalcify the base unit
from time to time. The frequency depends
upon the hardness of your tap water and
how often you use the coffeemaker. The
flashing Clean light will indicate when you
should clean your coffeemaker.
If the Clean light begins to flash when the
coffeemaker is turned on, it is telling you that
the calcium buildup is interfering with the
functioning of your coffeemaker and the
flavor of your coffee. To clean, fill the water
reservoir to capacity with a mixture of ¹⁄
³
white vinegar and ²⁄
³
water. Press the Clean
button. When the self clean light glows, turn
the coffeemaker on by pressing the on/off
button. The Clean light will shine steadily.
The coffeemaker is now in clean mode. One
cycle should be sufficient to adequately
clean the coffeemaker. When the cycle is
completed and the five beeps sound, the
coffeemaker will shut off. Turn the
coffeemaker on to see if the Clean light
continues to flash. If it does, turn it off and
then repeat the cleaning procedure with a
fresh solution of vinegar and water.
If the Clean light no longer flashes, turn the
coffeemaker off and then run one cycle of
fresh cold water through the unit before
using the unit again to brew coffee.
Notes on the Clean Function
Pressing the Clean button cancels all other
settings. If it is pressed accidentally, press it
again to return the coffeemaker to all its
previous settings. Pressing On/Off will also
exit the clean mode and turn the
coffeemaker off.