Filter
Top Products
6
7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear until you set the time.
Turn the Function Knob to CLOCK
Hold down the Hour or Minute button until
the clock begins flashing. Press either
button to select the desired time. Hold
buttons down to scroll through the digits, or
press and release to advance one digit at a
time. When scrolling, the numbers will
advance slowly and then speed up. When
the number displayed approaches the
desired time, press and release to advance
one digit at a time. Be sure the PM
indicator is on if a PM time is desired.
SETTING THE AUTO ON TIME
When you turn the Function Knob to PROG,
it displays a previously selected auto-on
time, or the default time (12:00pm).
1.
Turn the Function knob to PROG
Follow directions under SETTING THE
CLOCK (above) to program your start-
brew time.
2. Turn the Function knob to AUTO ON
LCD will display the current time.
3. Press and release ON/OFF button
A green light indicates that coffeemaker
is in AUTO ON mode. A red light will
come on when brew cycle begins. Both
lights will go off when Keep Warm cycle
ends.
NOTE: To start brew time at the same
time the next day, simply make sure the
Function Knob is on AUTO ON and press
and release ON/OFF button once more.
Green AUTO ON light will go on.
SETTING THE AUTO OFF TIME
Turn the Function Knob to AUTO OFF
Follow directions under SETTING THE
CLOCK (above) to program your
coffeemaker to shut off from 0 to 4 hours
after brew cycle is finished.
MAKING COFFEE
Follow instructions in “Before Brewing
Your First Pot of Coffee” above.
1.
Insert charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 8.
2.
Fill the water reservoir
Open the reservoir cover by lifting it up.
Pour in the desired amount of water
using the water level indicator located at
the side of the coffeemaker window.
3.
Set preferences
a.
Push the 1-4 cup button if you are
brewing fewer than 5 cups.
b.
Press Regular or Bold button to select
flavour strength.*
c.
Turn the Carafe Temperature dial to
low(L), medium(M), or high(H) and heater
plate will keep coffee at the temperature
you select.*
*
Features will remain at selected settings
until you change them.
4.
Add the ground coffee
Remove the filter basket by grasping the
handle and lifting straight up, and then
place it on the countertop. Insert a #4
paper filter or permanent filter. Be sure
that the paper filter is completely open
and fully inserted in the basket. It may
help to fold and flatten the seams of a
paper filter beforehand. Add 1 level
scoop of ground coffee per cup. Adjust
the amount according to taste.
BEFORE BREWING YOUR
FIRST POT OF COFFEE
During the manufacturing process, dust
can get trapped in your coffeemaker. We
recommend flushing out the system
before brewing your first pot of coffee.
Simply fill the reservoir and power on the
unit. (See steps #2 and #6 in MAKING
COFFEE instructions, below). DO NOT
ADD COFFEE!
Once you’ve done that, brew a pot of real
coffee and get ready to enjoy Cuisinart at
its best!
1.
On/Off Button
Use to turn your coffeemaker on and off.
Works in tandem with the function knob.
2.
Clock Display
Displays time of day, Auto On, and Auto
Off times.
3.
Hour and Minute Buttons
Use to set hours and minutes for time
of day, Auto On, and Auto Off time.
4.
Strength Selector
Regular and Bold buttons let you choose
the intensity of coffee flavour you prefer.
5.
1-4 Cup Setting
Improves extraction, flavour and
temperature when brewing fewer than 5
cups.
6.
Self-Clean Setting
Indicates time to clean coffeemaker to
remove calcium buildup.
7.
Carafe Temperature Knob
Set the heater plate to Low(L), Medium(M),
or High(H) to keep coffee in the carafe at
the temperature you prefer.
8.
Function Knob
a.
PROG
Select to program Auto On time.
Coffeemaker can be programmed to
automatically start brewing up to 24
hours in advance.
b.
AUTO ON
Select to automatically start brewing
coffee at the time you’ve programmed.
c.
AUTO OFF
Select to program your coffeemaker to
automatically shut off up to 4 hours
after brewing.
d.
BREW
Select to begin brew cycle when ON
button is pressed.
e.
CLOCK
Select to program time of day.
f.
AUDIBLE TONE (not shown)
A tone sounds 5 times when brew
cycle is complete (coffee may continue
to stream from the filter for a few
seconds after tone).
GETTING TO KNOW YOUR CONTROL PANEL
Detailed programming and use instructions are on pages 7 and 8.