Filter
Top Products
7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear until you set the time.
Hold down the Hour or Minute button.
The clock will begin flashing. Press either
button to select the desired time. Hold
buttons down to scroll through the digits or
press and release to advance one digit at a
time. When scrolling, the numbers will
advance slowly and then speed up. When
the number displayed approaches the
desired time, press and release to advance
one digit at a time. Be sure the PM
indicator is on if a PM time is desired.
SETTING THE AUTO ON TIME
1. Press and hold the Prog/Auto On
button for 2 seconds
The digital display will flash the default
time (12:00PM). Follow directions under
SETTING THE CLOCK (above) to
program your start-brew time.
2.
Set preferences
a. Push the 1–4 cup button if you
are brewing fewer than 5 cups. The
1–4 indicator will be shown on the
digital display.
b. Press Regular or Bold button to select
coffee flavor. The flavor setting will be
shown on the digital display.
3. Once desired Auto On time and
preferences are set...
Auto On setting mode will be exited
automatically after 5 seconds.
4.
To activate Auto On mode
Press the Prog/Auto On button once.
The Auto On indicator and program
indicator will be shown in digital display
and the LED light will illuminate blue.
NOTE: To cancel Auto On setting, press the
Prog/Auto On button once. The LED light
will go off.
SETTING THE AUTO OFF TIME
1. Press and hold the Auto Off button
for 2 seconds.
The digital display will flash the program
default time at 2:00. Follow directions
under SETTING THE CLOCK to program
your coffeemaker to shut off from 0 to 4
hours after brew cycle is finished.
2. To exit/confirm Auto Off time setting:
Do not touch any buttons. Auto Off
mode will be exited automatically after
5 seconds.
MAKING COFFEE
Follow instructions in BEFORE BREWING
YOUR FIRST POT OF COFFEE above.
1.
Insert charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 9.
BEFORE BREWING YOUR
FIRST POT OF COFFEE
During the manufacturing process, dust
can get trapped in your coffeemaker. We
recommend flushing out the system
before brewing your first pot of coffee.
Simply fill the reservoir and power on the
unit. (See steps #2, #4 and #6 in MAKING
COFFEE instructions, below). DO NOT
ADD COFFEE!
Once you’ve done that, brew a pot of real
coffee and get ready to enjoy Cuisinart at
its best!