Filter
Top Products
16
Locking the Bean Hopper
ß When replacing the hopper back onto the unit, ensure the hopper container release knob is in the
un-lock position. Once in place, turn the knob back into the locked position
N.B. If the hopper is not locked into place, the appliance will not operate. If you try to turn the unit on
with the hopper is not locked into place the appliance will beep continuously until the missing parts
are installed and you close the lid.
N.B. The Channel Cover must be in place before grinding otherwise the appliance will not function.
(see diagram below)
Restarting the process will not affect coffee results. If you do not want the grinder to restart, press
the “Grind off” button before pressing the ‘On/Off’ button. Once the hopper is locked back into pla-
ce, the beeping will stop. Press the ‘On/Off’ button and the grind and brew process will start again
from the beginning.