Filter
Top Products
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a
Cuisinart
®
Premier Series
11 Cup Food Processor,
and the standard parts
for it:
Work bowl, work bowl
cover, large and small
pushers, PowerPrep
®
Metal Dough blade, metal
chopping/mixing blade,
slicing disc, shredding disc,
detachable disc stem for
discs, spatula, How-to DVD
and recipe/instruction book.
CAUTION:
THE CUTTING TOOLS
HAVE VERY SHARP
EDGES. To avoid injury
when unpacking the
parts, please follow
these instructions.
1. Place the box on a low
table or on the floor
next to the kitchen
counter or table where
you intend to keep the
food processor. Be
sure the box is right
side up.
2. Remove the cardboard
insert. You will see a
rectangular block of
plastic foam that holds
the processor parts,
each fitted into a cavity
in the foam.
3. The Detachable Disc
Stem for the discs (A)
sits in a cavity in one
corner of the foam
block. Remove this
first.
4. The Pusher Assembly,
with large and small
pushers, (B) sits in the
adjacent cavity.
Remove this next.
5. The PowerPrep
®
Metal
Dough Blade (C) rests
in a cavity on the oppo-
site side of the foam
block. Remove it from
the foam.
6. The plastic Spatula (D)
is on one long side of
the foam block.
Remove it next.
7. The Slicing Disc (E) is
on the edge of one of
the long sides of the
foam block; the
Shredding Disc (F) is
on the other side. Slide
them out WITH GREAT
CARE; THE BLADES
ARE VERY SHARP.
8. Lift out the DVD from
its space on one side of
the foam block.
9. Lift out the foam block.
10. Remove the instruction/
recipe book.
11. The housing base with
work bowl, metal blade
and cover are at the
bottom of the box. The
metal blade is loose in
the work bowl beneath
a foam insert. Do not
reach into feed tube.
Do not turn over work
bowl without first
removing metal blade.
Remove work bowl
cover by turning it
clockwise and lifting.
12. Remove the base
and bowl together
by grasping the
plastic bowl at the
top with both hands
and lifting the bowl
straight up. Do not
rotate the bowl clock-
wise on the base. This
will cause the bowl to
separate from the base.
13. Place the food proces-
sor on the counter or
table. Remove foam
cylinder insert from top
of metal chopping
blade. Read the
instructions thoroughly
before using the
machine.
14. Save the shipping
cartons and plastic
foam blocks. You will
find them very useful if
you need to repack the
processor for moving or
other shipment.
Please watch the
enclosed How-to DVD
before using the food
processor.
NOTE: Remember to
return your completed
product registration card
with all information care-
fully filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE
THE METAL BLADE BY
GRASPING THE CENTER
WHITE HUB AND LIFTING
IT STRAIGHT UP. NEVER
TOUCH THE BLADES, AS
THEY ARE RAZOR
SHARP.
2