Filter
Top Products
PRACTICING SLICING
AND SHREDDING
18
1. Insert a slicing or shredding
disc, put the cover with large
feed tube on the work bowl and
insert the prepared food in the
feed tube.
2. Prepare the pusher assembly.
Lock the small pusher in place
and unlock the slide lock on the
sleeve, so the pusher can move
up and down freely.
3. Slide the pusher assembly
over the feed tube and push the
sleeve down to lock it into place.
Apply pressure to the pusher
while pressing down the
OFF/PULSE lever. Release the
lever as soon as the food is
sliced or shredded.
4. You can load the feed tube
repeatedly without removing the
work bowl cover. Simply grasp
the pusher assembly with your
fingers on the wide locking tab at
the back of the sleeve. Press
firmly on the tab and lift up. The
pusher assembly will come off
easily, leaving the cover and feed
tube in place. Your other hand is
free to reload the feed tube.
PICK UP 4 COLOR
PHOTOS FROM FILM
PICK UP 4 COLOR
PHOTOS FROM FILM
PICK UP 4 COLOR
PHOTOS FROM FILM
PICK UP 4 COLOR
PHOTOS FROM FILM
03CU13135 DLC-8S IB 6/30/03 3:28 PM Page 21