SPECIAL CORD SET
INSTRUCTIONS
A short power-supply
cord is provided
to reduce the risks
resulting from becoming
entangled in or tripping
over a longer cord.
Longer extension
cords are available and
may be used if care is
exercised in their use.
If a long extension cord
is used, the marked
electrical rating of the
extension cord must
be at least as great
as the electrical rating
of the appliance. The
extension cord should
be a grounding-type
3-wire cord, and the longer cord should be
arranged so that it will not drape over the
countertop or tabletop where it can be pulled
on by children or tripped over.
For your protection, this unit is equipped with
a 3-conductor cord set that has a molded
3-prong grounding-type plug, and should
be used in combination with a properly
connected grounding-type outlet as shown in
Figure A.
If a grounding-type outlet is not available, an
adapter, shown in Figure B, may be obtained
so that a 2-slot wall outlet can be used with
a 3-prong plug. As shown in Figure C, the
adapter must be grounded by attaching its
grounding lug under the screw of the outlet
cover plate.
NOTE: Do not remove the grounding prong.
CAUTION: Before using an adapter, it must
be determined that the outlet cover plate
screw is properly grounded. If in doubt,
consult a licensed electrician. Never use an
adapter unless you are sure it is properly
grounded.
Note: Use of an adapter is not permitted in
Canada.
TABLE OF CONTENTS
Important Safeguards ................................ 2
Special Cord Set Instructions ..................... 3
Unpacking Instructions ............................... 3
Brief History of Tea ...................................... 4
The Health Benefit of Tea ............................ 4
Features and Benefits ................................. 4
Operation ..................................................... 5
Helpful Hints ................................................ 5
Cleaning and Maintenance ......................... 5
Decalcification ............................................. 5
Warranty ...................................................... 6
UNPACKING
INSTRUCTIONS
1. Place the box on a large, sturdy, flat
surface.
2. Remove the instruction book and any
other literature.
3. Remove the kettle lid from the box and
remove the polybag.
4. Remove the upper insert.
5. Lift the kettle from the box and remove
the polybag.
6. Remove the lower insert.
7. Lift the power base from the box and
remove the polybag.
We suggest you save all packing materials in
the event that future shipping of the machine
is needed. Keep all plastic bags away from
children.
3