Filter
Top Products
Permanent filter, filter basket, filter basket cover,
carafe and lid.
Wash in warm soapy water and rinse thoroughly
or clean in the upper rack of the dishwasher.
Dry all parts after every use.
Remove hopper lid, turn hopper release knob to unlocked position
to remove hopper. Set aside unused coffee beans.
Wash hopper and lid with warm, soapy water,
rinse thoroughly. Or place hopper and lid on
upper rack of dishwasher.
NOTE: DRY ALL PARTS THOROUGHLY.
DO NOT ADD WATER TO UNIT ONCE
THE HOPPER IS REMOVED AS WATER
CAN DAMAGE THE GRINDER MOTOR.
Remove any excess ground coffee
from the grinder area before placing
hopper and lid back on.
Hopper Cleaning Methods:
To set the Time: Press and hold the Hour or Minute button until the clock begins flashing. Hold down the Hour
or Minute button to quickly scroll through the numbers. When desired time approaches, release the button and
press repeatedly to advance one digit at a time. To finish, wait for the numbers to stop flashing.
1.
To program the Auto-On: Press and hold the Program button until the clock begins flashing. Set the time you
want coffee to begin brewing (follow “set the time” instructions). Once complete, press the Program button
again. The green indicator light will come on to remind you that the programming function is in use.
2.
3.
At the programmed time, the red On/Off
indicator light will come on, indicating that
the brew cycle is starting.
4.
To start the brew cycle at the same time
on another day, simply press the Program
button and release. The green Auto-On
will illuminate.
Quick Reference PROGRAMMING Guide
Keeping it CLEAN