To clean the inside of the
detachable stem, slide the
stem release button on the
side up as far as it will go
and hold it there as you run
water through the stem.
IMPORTANT:
Never store any blade or
disc on the motor shaft. No
blade or disc should be
placed on the shaft except
when the processor is
about to be used.
FOR YOUR SAFETY
Like all powerful electrical
appliances, a Premier
™
Series Food Processor
should be handled with
care. Follow these guide-
lines to protect yourself and
your family from misuse
that could cause injury.
Handle and store metal
blades and discs carefully.
Their cutting edges are
very sharp.
Always place discs on flat,
stable surface before con-
necting detachable stem.
Never put blades or discs
on the motor shaft until
the work bowl is locked
in place.
Always be sure that the
blade or disc is down on
motor shaft as far as it
will go.
Always insert chopping
blade and dough blade in
the work bowl before
putting ingredients in bowl.
When slicing or shredding
food, always use the
pusher. Never put your
fingers or spatula into
feed tube.
Always wait for the blade or
disc to stop spinning before
you remove the pusher
assembly or cover from
the work bowl.
Always unplug the unit
before removing food,
cleaning, or putting on or
taking off parts.
Always remove work bowl
from base of machine
before you remove
chopping blade or
dough blade.
Be careful to prevent the
chopping blade from falling
out of the work bowl when
emptying the bowl.
Remove blade before tilting
bowl, or hold it in place
with your finger, a spatula
or a spoon.
TECHNICAL DATA
The motor in your food
processor operates on
standard line operating
current. The appropriate
voltage and frequency for
your machine are shown
on a label under the base.
An automatic, temperature-
controlled circuit breaker
in the motor ensures
complete protection against
motor burnout. If the
processor runs for an
exceptionally long time
when chopping, mixing or
kneading a thick or heavy
mixture in successive
batches, the motor may
overheat. If this happens,
the processor will stop.
Turn it off and wait for
the motor to cool before
proceeding. It will usually
cool within 10 minutes. In
extreme cases, it could
take an hour.
Safety switches prevent
the machine from operating
when the work bowl or the
cover is not locked into
position. The motor stops
within seconds when the
motor is turned off, and a
fast-stop circuit stops it
instantly when the pusher
assembly is removed.
Cuisinart
®
Premier
™
Series offers a Three Year
Limited Warranty on the
Entire Machine.
FULL TEN YEAR
WARRANTY ON
MOTOR
This warranty supersedes
all previous warranties on
Cuisinart
®
Premier
™
Series
Food Processors.
This warranty is available
to consumers only. You are
a consumer if you are the
owner of a Cuisinart
®
Premier
™
Series Food
Processor that was
purchased at retail for
personal, family or house-
hold use. This warranty is
not available to retailers
or other commercial
purchasers or owners.
We warrant that your
Cuisinart
®
Premier
™
Series Food Processor
will be free of defects in
material or workmanship
under normal home use for
three years from the date
of original purchase.
We warrant that the motor
for your Cuisinart
®
Premier
™
Series Food Processor
will be free of defects in
material or workmanship
under normal home use for
ten years from the date of
original purchase. This
motor warranty covers the
motor and excludes all
other parts in the motor
base assembly area such
as the upper and lower
plastic housings, work bowl
and cover, blades and all
electrical components and
vertical projecting motor
shaft sheath.
18
02CU13445 DLC-2011 IB REV 8/4/03 1:50 PM Page 19