Filter
Top Products
5
HELPFUL REMINDERS
• Once the cover is in position, additional ingredients can be added
during blending by simply lifting the measured pour lid, adding
ingredients, and replacing the measured pour lid.
• Cover should always be in place while the unit is on.
• Warning: Do not place blender jar onto base while motor is running.
• Do not twist locking ring off blender jar when removing blender jar
from base. Simply lift blender jar from motor base.
• Boiling liquid or solid frozen foods (with the exception of ice cubes
or ½-inch [1.3 cm] pieces of frozen fruit) should never be placed in
the blender jar.
• Do not place ice, frozen foods or very cold liquids into a blender jar
which has come directly from a hot dishwasher.
• Do not place very hot liquids or foods into a blender jar which has
come directly from the freezer. Boiling liquids should cool for
5 minutes before being placed in blender jar.
• Follow Cleaning and Maintenance instructions on page 6 prior to
your first use.
OPERATION
1. Place the motor base of your Cuisinart
®
Supreme Super 600
™
Blender onto a flat, sturdy surface. It is important that the surface
be clean and dry. Assemble the blender by following the assembly
instructions. Once the jar is assembled and is in position on the
motor base, plug the blender into an electrical outlet.
2. Add all necessary ingredients to the blender jar, and replace the
cover. You may add more ingredients by lifting the measured pour
lid and dropping ingredients through the fill area. Replace the
measured pour lid after adding ingredients. Do not place hands
into blender jar with blender plugged in.
Note: Add liquid ingredients first, then follow with solid ingredients.
This will provide more consistent blending and prevent unnecessary
stress on the motor.
QUICK REFERENCE GUIDE
To activate blender Press “On” – The blender is in on mode
To begin blending Press desired speed button
To change speeds Press desired speed button
To pulse In “On” mode press “Pulse”, then press
and release desired speed button
as needed
To crush ice In “On” mode, press and release
“Ice Crush” button as needed.
To stop blending Press “Off” button.
(and deactivate blender)
To stop blending Release button.
(in pulse or ice crush mode)
To stop blending (in chop, mix Press speed button again. This will return
purée or liquefy mode) the blender to “On” mode. Press “Off”
button to turn blender off.
SPEED SELECTION GUIDE
Refer to this guide to choose the best speed for your desired result.
Ingredient Speed Result
Nuts Chop Coarse to fine
Whipping cream Mix Thick topping
Bread crumbs Mix Uniformly fine
Grating citrus zest Purée Uniformly fine
Milk Shakes Purée Smooth and creamy
Baby food Purée Smooth and creamy
Health drinks Liquefy Smooth and creamy
Frozen cocktails Liquefy Thick and slushy
Grinding hard cheese Liquefy Coarse to fine
Spices Liquefy Coarse to fine
Ice Ice Crush Snowy