Filter
Top Products
PG-27169A
IMPORTANT
Do not throw away. Read before operating your new
Blend and Cook Soupmaker. Keep for future reference.
These helpful hints are intended to be a supplement to the Instruction Booklet.
In order to ensure safe operation and optimum performance,
please read the entire Instruction Booklet.
SETUP continued GETTING TO KNOW YOUR CONTROL PANEL
Place jar onto
base, making
sure the three
interlocking pins on the
underside of the collar
(f) t into the rectangular
rubber connector on
the base (g).
NOTE: If jar does not sit ush on base, do not force it!
Remove jar and slightly turn the clutch (h) located
in the center of the top of the base.
1. Power On/Off Button –
Press the button and the
red LED light will flash; the
unit is now in Standby
mode. If the On/Off button
is pressed while in Standby
mode, the unit will turn off.
2. Cooking Timer Control –
NOTE: Timer must be set
before temperature can be
set. When the unit is in
Standby mode, the cooking
time can be set by pressing
the + or – buttons. Time
counts up or down in one-
minute increments, up to 30
minutes. (Note: If – button is
pressed first, 30-minutes
will be displayed.) Hold but-
ton down to scroll through
minutes, or press and
release to advance one
minute at a time.
3. Temperature Controls –
NOTE: Cooking time must
be selected before setting
temperature. The unit will
start its heating or cooking
cycle when High, Medium or
Low temperature is selected.
The temperature can be
changed at any time during
the heating or cooking
cycle. The heater can be
manually turned off by
pressing the Temperature
control currently in use (this
will be illuminated) or
pressing the power On/Off
button. If the power On/Off
button is used to turn off
the heater, the unit will
power off and must be
restarted for blending.
NOTE: Blending and
cooking cannot operate
simultaneously.
4. Stir Button – The Stir
function does just what it
says, allowing you to stir
ingredients at a low speed.
It can be operated at any
time during the cooking or
blending cycle. It can also
be operated in Standby
mode when ingredients are
being added to the glass
jar. It is a manually operated
function; it will stir only
when pressed. Giving you
complete control.
5. Blending Control – The
Blending control has 4
speeds – 1 is the lowest
setting, 4 is the highest.
When in Standby mode, the
Blending function is active
and operable. NOTE:
Blending and cooking
cannot operate
simultaneously. When
blending hot items such as
soups or sauces, only use
speeds 1 through 3;
cooking will be non-
operational.
6. Pulse – The Pulse setting
can only be used in
Standby mode. This
function creates a burst of
power for quick blending.
Rotate counterclockwise,
release Blending control
and repeat as desired. You
determine the duration of
each pulse. The Pulse
function is best for breaking
apart larger pieces of food.
NOTE: Pulsing and cooking
cannot operate
simultaneously.
5.
6.
g. f.
h.
2.
1.
6.
4.
5.
3.