Dacor AERB30G06 Range User Manual


  Open as PDF
of 2
 
Dacor ● 1440 Bridge Gate Drive, Diamond Bar, CA 91765 ● Tel: (800) 793-0093 ● FAX: (626) 403-3130 ● www.Dacor.com
STEP 7: Remove the protective plastic cover
from the new backguard.
STEP 8: Place the new backguard over the back
of the range. The backguard ts over
the exhaust duct sticking up on the
back of the unit. Be sure to slide the
tabs on the back of the backguard in-
side the anges on the back of the unit.
STEP 9: Fasten the backguard in place with the
three (3) existing chrome plated screws.
STEP 10: Tighten the two (2) top screws on the
back of the side panels.
STEP 11: Reinstall the grates.
STEP 12: Turn on the gas at the gas supply valve.
Connect the power cord to the electrical outlet.
Backguard
Exhaust
Duct
Chrome Plated
Screw, 3 Places
Screw,
2 Places
Tab
Flange
 previous