Filter
Top Products
9
Before You Call for Service
Problem Solution Guide
PROBLEM MAY BE CAUSED BY WHAT TO DO
Nothing works. Appliance does
not cool, control panel display is
off and light does not work.
Appliance not connected to
electrical power.
Make sure appliance is plugged in.
Electricity to power outlet is off. Turn power on at the circuit breaker panel or fuse box.
Check for tripped circuit breaker or blown fuse.
Appliance is turned off. See Turning the Power On and Off on page 4.
Power outage. Contact power company.
Light does not come on. No power. See nothing works above.
Light is turned off. See Interior Lighting on page 5.
Light bulb burned out. Call for service to have it replaced. See Getting Help on
page 10 for details.
Loud running noise. Bottles vibrating. Adjust bottles and racks to minimize vibration.
Appliance not standing firmly on
floor.
Check appliance leveling according to installation
instructions. If problem persists, contact installer. Have
installer level appliance or modify installation.
Appliance runs constantly. Room temperature too hot. Make sure room temperature is between limits on room
temperature chart on page 3. Adjust ventilation system if
necessary.
Door has been left ajar. Make sure door is firmly shut.
Appliance mounted too close to
heat source.
Have a technician or installer modify the appliance
installation or the heat source.
A lot of bottles added to appliance. The appliance will run until it has had a chance to cool all
the bottles.
Temperature not cold enough. Temperature not set properly. See Setting the Temperature on page 4.
See Appliance runs constantly,
above.
“F0” or “F1” appears on the
display.
Appliance has a fault. Disconnect the power cord. Call for service. See Getting
Help on page 10 for details.